Bubble Laminate Winding Line: Confirming Foil, Metallised Film and Bubble Constructions
Source Read the original source (opens in a new tab) →
Scroll horizontally to view the full table
Direct answer
Aluminium foil or metallised film can be combined with bubble layers in different laminate constructions. The photograph documents the winding and production setting; it does not by itself prove hold time, temperature difference or regulatory status for a material or complete package. Confirm those requirements through the relevant sample, report and order specification.
Construction and acceptance discussion
| Item | What to confirm |
|---|---|
| Laminate construction | Discuss single- or double-sided reflective layers and single or double bubble; approve the actual combination through a sample |
| Substrate | State the foil or metallised-film type, bubble material, basis weight and thickness in the specification |
| Sheet performance | If reflectance, thermal or moisture data are required, request the report for the relevant material or sample |
| Complete pack | Cold-chain, sea-freight and outdoor projects should be validated against the load, environment, route and duration |
| Application | Suitable for evaluating pallet covers, container liners, tank covers and other thermal-protection concepts |
| Acceptance | Use the approved sample, specification and agreed test method |
Image caption
The image shows the bubble-laminate winding end. It does not mean that every material combination, width or performance level applies to the same equipment and order.
Source and contact
Source: Suzhou Zhifei Packaging Materials Co., Ltd. production-line photograph Content updated: 29 September 2026 Corporate website: https://www.aspyrature.com Business contact: zephyr@aspyrature.com